Arctic Shield – Hydrogel Film Installation Instructions (Smartphone)

You can find video instructions here: YouTube installation video

1. Clean the screen carefully with the included wet and dry cloths.
2. Remove the screen protector completely from the plastic base.
3. Place the screen protector in the correct position on the phone's screen. Do not press it down yet.
4. Once the guard is approximately in place, proceed to step 5. You can move and position the slide as many times as you want – this will not affect the final result. Once the cover is perfectly aligned, press lightly with the installation spatula to ensure any dust adheres to the film.
5. Lift the screen protector from the blue sticker at the top or bottom corner towards the center and carefully fold over the center line.
6. Press the film back onto the screen with a spatula, starting from the center line and working outwards. It is completely normal for the plastic dust collection plate to come loose during installation.
7. Repeat the same on the other side. The dust collection plate also comes off on this side, which is part of the process.
8. If your device has a curved screen, use a spatula to smooth the curved edges . You can finalize these points in step 10.
9. Remove the top protective film by pulling on the red sticker (the film has a shield pattern).
10. Complete the installation: Make sure the protective film is attached on all edges. Push the air bubbles towards the nearest edge with a spatula. Note: After installation, a light line may remain in the middle of the screen. This is normal and will disappear within a few days.

---

Safety instructions and warnings

– Do not use the hydrogel screen protector with a broken screen.
– Keep the film and accessories out of the reach of children and pets.
– Do not expose the film to extreme temperatures or direct sunlight.
– Avoid using harsh chemicals or cleaning agents on the contact surface.
– If the membrane becomes damaged or detached, replace it with a new one.

Product safety

The product has a lifetime warranty. You can get a new identical film for any reason for just the handling fee. Exchanges are made by ordering from mobiilikauppa.com against receipt or according to the instructions on the website.

Environmental friendliness

Dispose of used film according to local recycling regulations. The packaging can be recycled in cardboard collection.

---

See also

➡️ Armor films – full range
➡️ Bubble-free installation – expert tips
➡️Hydrogel vs. tempered glass – which is right for you?