Arctic Shield Asennusohjeet älykellot

Arctic Shield Installation instructions for smart watches

Arctic Shield – Hydrogel Film Installation Instructions (Smartwatches)

Video instructions: Watch the YouTube installation video

  1. Clean the screen surface thoroughly with the included cleaning cloths.
  2. Remove the screen protector completely from the plastic base.
  3. Place the screen protector in the correct position on the smartwatch screen. Press lightly towards the screen to keep the cover in place while attaching.
  4. Once the guard is in place, proceed to step 5. You can reposition the screen protector as many times as you want – this will not affect the final result.
  5. Lift the screen protector from the blue sticker and fold the film lightly over the center.
  6. Reattach the film to the screen using the installation spatula , starting from the center and working outwards. It is completely normal for the plastic dust collection plate to come loose during installation.
  7. Repeat the same on the other side. The dust collection plate also comes off on this side – this is part of the installation process.
  8. If the screen has curved edges, use a squeegee to smooth the edges . You can finish the curved areas in step 10.
  9. Remove the top protective film by pulling on the red sticker (shield pattern on the protective film).
  10. Complete the installation: Make sure the film is attached on all edges. Push any air bubbles towards the nearest edge with a spatula. Note: After installation, a light line may appear on the screen. This is normal and will disappear within a few days.

Safety instructions and warnings

– Do not use the hydrogel screen protector with a broken screen.
– Keep the film and accessories out of the reach of children and pets.
– Do not expose the film to extreme temperatures or direct sunlight.
– Avoid using harsh chemicals or cleaning agents on the screen.
– If the membrane becomes damaged or detached, replace it with a new one.

Product safety

The product has a lifetime warranty. You can get a new identical film for any reason for just the handling fee. Exchanges are made by ordering from mobiilikauppa.com against receipt or according to the instructions on the website.

Environmental friendliness

Dispose of used film according to local recycling regulations. The packaging can be recycled in cardboard collection.

See also

➡️ Armor films – full range
➡️ Bubble-free installation guide
➡️Hydrogel vs tempered glass – comparison

Back to blog